This new design was worked on over the period of a year,we wanted it to be a complete kit,so by building it ourselves we would then understand what was required in the process,we supply a writen builders guide with each kit too.The kit includes the CNC cut panels,a jig to laminate the roof on,plywoods,epoxy,glass tape,micro ballooons,timber to laminate the top cross beam on the roof and inside corners,plus the 6mm toughend glass in either clear or tinted,with the Dow-Corning 813 silicone sealer to stick the glass in with.We can ship as a flat pack world wide,with one kit already in New Zealand and another to Japan pending.Sizes can be made larger or smaller to suit your boat.The vent hatch and teak grab rails are optional extras.
Space and comfort is what this is all about,the vision through the clear toughend glass is better than with plastic too.
Bonding and epoxy filleting the joints with a putty made from micro balloons (provided) and our 816 epoxy cleans up the joint lines.
At this stage International Paints epoxy Intergard has been applied by brush,it sands very well,when the sanding is done a top coat with white polyurethane will be sprayed on.
A job in process is nearly complete.
No comments:
Post a Comment