Sunbeam Sport Oil Cooler mounting brackets

Now being re made and the first batch of ten sets should be ready next month?

Note, two pairs were sold today, payment by PayPal was accepted. Later the same day we sold the other eight pairs, more will be available next month.

The standard so called Wire Brush oil cooler works very well but a higher output alloy one can be fitted also?

http://ckdboats.blogspot.com/2011/08/sunbeam-sport-oil-cooler-mounting.html

 

The brackets will be complete and ready to install

 

 

Prices when I have the first ones made!

 

Roy

 

 

A world first, Mirror Dinghy kits to be CNC cut in South Africa

Mirror Dinghy news:

At the 2013 Mirror Worlds held on Lough Derg, N. Ireland, South African's Ryan & Michaela Robinson where crowned World Champions!

Lough Derg Yacht Club in Dromineer, North Tipperary, hosted the 2013 Mirror World Sailing Championship, the first world sailing championship to be held on the inland waters of Ireland.

I note that the South African world champions won in the plywood / epoxy version of the Mirror Dinghy class, well done to both of you!

Note, both the Ply/Epoxy and the GRP boats need to have a minimum weight of 45.5 kgs, so there is no difference between either.  Corrector weights to 3.0kg are allowed, once placed and fixed at the thwart, they are marked and become part of the boats measurement certificate.

Unknown to myself, I was informed only yesterday that when we start CNC cutting our Mirror Dinghy kits we will become the fist such company or person to such a thing.

What a privilege!

Roy

See also www.ckdboats.com
 

50 years of the Mirror Dinghy

Please order your Mirror kit now, we are taking in plywood stocks to ensure we can meet the demand prior to the Mirror Worlds here in January 2015.

Cutting a Mirror Dinghy kit with a CNC machine has as yet never been done, so we will be the first to offer such accuracy, meaning each and every Mirror kit we sell will be the same.

http://mirror.org.za/

Roy

The Mirror dinghy, the little plywood wonder that brought sailing to the masses, is still loved today by some of our best-known sailors.

Olympic medallist Stuart Bithell learned to sail in a Mirror. Round-the-world yachtswomen Ellen MacArthur and Dee Caffari are big fans too.  And this year the Mirror dinghy, the little plywood wonder that brought sailing to the masses and launched the careers of some of our top sailors, is 50 years old.  Last summer Stuart, now 25, claimed Olympic silver in the 470 class.

See also www.ckdboats.com
 

Historic Table Bay Sailing

A request for information on a picture of yachts sailing on Table Bay, Cape Town has just come in.
I would guess mid 1950s to 1960??

Hi

Attached is a photo that was found by a friend of mine in the SAR (South African Railways) archives. I wonder if you may know the class and approximate date when this would have been.

 

Thanks
Andy

 

Click on the picture to enlarge it, what a fine shot!

My reply is below:

Note: I now believe the boat in the center to be Caprice, built here in Cape Town by Lowe and Halverson and owned by the late Jerrold Salaman, can anyone confirm this?

Both of the yachts below were owned by Jerrold, as were others.

Read here to see his obituary: http://rcyc.co.za/sailing-news/jerrold-salaman

  “Caprice” – 39 foot Gaff Cutter

                                         “Windward” – 42 foot Gaff Cutter designed by N D Ross,      

                                         built by Louw and Halvorsen in Cape Town

Andy,

 

Thanks on the picture, its really a fine shot and one I have not yet seen?

The boat center to the picture may be St George, the Maritime Museum had her as a static display some years back, I supplied the materials for her reconstruction.

The larger yacht to the right will be Halloween, she was restored by the Stremple brothers about 15 years back, I supplied all the wood and ply. They then sailed her to Brasil, then onto Spain where she was  sold.

I may find the yacht on the left in my book on the history of the RCYC, I will have a look and let you know if I find it?

Any more such pictures?

Regards

Roy

I took this picture, also in Table Bay but many years later and an Easter TBA meeting, circa 1998 or thereabout?

Note that Haloween has been converted to a more traditional gaff rig, Ren Penso was not happy when she heard the new that Karl Stremple was going this route but by then Haloween was a near wreck and any care was to be credited. In the end the boat was more or less rebuilt and to a very high standard. This included new decks, masts and spars, all birdsmouth constructed, I supplied the Oregon pine to that work, the teak to the decks also.

Roy
 

Mirror Dinghy kit supplier in Southern Africa

For some while now and very much behind the scenes we have been discussing the possibility of CKD Boats cc of Hout Bay near  Cape Town, South Africa becoming the official ISAF recognised Mirror Dinghy kit suppliers to South Africa and other countries.

Todays inter class dinghy show was held at the Zeekoevlei Yacht Club, well attended many got to meet the class leaders and in some cases the boat builders also.

Click on the picture for a larger image.

We will soon start the construction of our hull # 1, this needs to be measured for proof that we have CNC cut the boats shape correctly, when this is proven we will be offering the Mirror Dinghy in a number of options.

A well campaigned wood epoxy Mirror Dinghy transom.

 

CKD Boats cc will offer the wood epoxy boat as a number of options.

 

A base kit with the CNC cut okoume marine ply to BS 1088, wood, epoxy and glass tapes only, the kit pre assembled but not finished , or the boat finished to the stage you require.

 

Options this way will suit most pockets.

Exciting news!

Roy

See also www.ckdboats.com

WPMC Historics is back!

We missed this event in 2013 as the costs were said to be too large and the Cape Town Western Province Motor Club declined to have the cars that year, now they are back for 2014.

Entry was R80 per person in 2012, expect similar or a little more but the value is worth every cent.

See you there, best to be early so you can really see the cars close up and meet the drivers. Take sunscreen and a hat to cover your head and neck, the sun can really get you over the period of an entire day.

Roy
 

Small boats show today!

For those in the Cape Town area, you can see a display of various dinghy classes today and at the Zeekoevlei Yacht Club, it opens at 9am and runs to 2pm, see you there this morning!

This is the Mirror Dinghy, the file picture is named Wirrel Ark Dinghy, Wirrel is a town near Birkenhead, Merseyside.

 

The same class of boat and under spinnaker

 

Looks like fun.

 

Roy

 

See also www.ckdboats.com

 

One for the beer drinkers

"When we drink, we get drunk. When we get drunk, we fall asleep. When we fall asleep, we commit no sin When we commit no sin, we go to heaven. So, let's all get drunk and go to heaven!"

 

George Bernard Shaw

Ford Corsair races the Windsor Castle to Southampton, England

This was brought back to my memory by the customer I am restoring the 1971 Hillman Imp for.

Ford Corsair – that’s calling back the past. They never seemed to catch-on here for some reason.

I remember well a publicity stunt organised bewteen Ford and the Union-Castle Line. Departing either Southampton or Cape Town (I forget which it was) at the same time, bound for the other port, the mailship and the Corsair were pitted against each other in a race. I have an idea that it was from Cape Town to Southampton and the ship was the “Windsor Castle”. I remember seeing newspaper photos of the car parked on the quayside (“A”-berth it then would have been) in Cape Town with the ship also in the picture. I can’t remember how it ended, but the marketing people of both companies I’m sure would have engineered a simultaneous arrival of both ship and car so as not to lose face! The car made it anyway.

Do you recall anything of this? It would have been circa. 1960-63 I think.

Robert.

Both the Ford Corsair and the mailship were proud products of Merseyside, what happened, they build ships like this on the Mersey no more and Ford moved out too?

Note, the cars number plate dates it to 1967 by the way.

Roy

Another photo pulled from the Ford media photo collection, this one a nice color shot of Eric Jackson and Ken Chambers posing with their Ford Corsair in front of the Windsor Castle following their race with the luxury liner from Cape Town to Southampton. The caption for the photo on the Ford media site claims that Jackson and Chambers beat the liner in the race, but the website for the London-Algiers-Cape Town Rally notes that the results of the race weren’t so cut-n-dry:

Ford were pleased with Eric’s effort in the Cortina (Jackson and Chambers had set the London-Cape Town record in 1963), so a couple of years later in 1965 they planned a publicity stunt to race the liner RMS Windsor Castle from Cape Town to Southampton. This ship, the last passenger liner built at Cammell Laird in Birkenhead and last of the Union-Castle mailships that sailed between Southampton and South Africa, would average 24 mph and Captain Hart thought it a no brainer – he would win. Jackson set off in the Corsair but lost time with a string of punctures. He used Firestone cross-plies, and found the inner tubes were rubbing badly by the ribbing inside the tyres. Cross-plies, he argued, are available all along the route and have stronger side-walls – but it proved to be a duff choice, and the car’s progress suffered. At one point, Eric was changing tubes, fixing a puncture, on the move!
Cameroon refused the car so it had to be flown in an air-lift – and at a stroke was no longer keeping the wheels on the ground. They then drove non-stop to England, reaching a hotel at Gatwick the night before the day the ship was due to dock, the crew took a hotel room for a few hours rest and then drove to Southampton. Ford publicity chief Walter Hayes had agreed with Captain Hart that due to the air-lift, they would call it a draw, and the Corsair made it to the dockside as the ship entered the harbour.

The Ocean Liner Virtual Museum has a more elaborate version of the story that places the race in 1967:

In May 1967 the RMS Windsor Castle was involved in a dramatic race from Cape Town to Southampton against a motor car. It began after Union-Castle Line claimed sea travel was the fastest means of travel from South Africa after air. The Ford Motor Company disputed this and threw down the gauntlet for the ship to race one of their cars from Cape Town back to England. So the RMS Windsor Castle took up the challenge and in May 1967 raced home against a Halewood built Ford Corsair 2000E in a dramatic and nail biting race between these two Merseyside built machines. Sadly despite the high profile nature of this race sadly press coverage was muted. The ship and the car (with rally drivers Ken Chambers and Eric Chapman), left simultaneously from Cape Town dockside to a great send off bound for Southampton. The liner’s 7,000 mile sea voyage was pitched against the 9,700 road journey. Chambers and Chapman had many adventures along the way. Including a moment when the Corsair fell into a 6ft, water filled pothole and had to be rescued by 30 locals and 200ft of rope. Other challenges included petrol shortages (nuns once gave them beer as a substitute!), armed Congolese soldiers forcing frequent stops (their support team and plane were locked up for several days), plus 24 tyre changes and 37 puncture repairs. Even, just before reaching Southampton, they were pulled over by West Sussex Police and cautioned for having a dirty number plate! Accounting for the driver’s air travel, the race was declared a draw, although the Corsair arrived the evening before the ship sailed in.

The RMS Windsor Castle was broken apart for scrap five years ago. Anybody know the ultimate fate of the Corsair that raced her? And anybody know the exact year the race took place?

Posted in boats,Hemmings Sports & Exotic Car,motorsports,road trips and cruising

Tagged with Cape Town to Southampton, Eric Jackson, Ford Corsair, Ken Chambers, London to Cape Town, publicity stunts, RMS Windsor Castle

1. johnfromstaffs says:

   June 23, 2010 at 2:35 pm

   The oddities of the British registration system come to light in this. The plate on the car appears to be “UVW 999E”. If this is so the car will have been registered in Essex between 1st January 1967 and 31st July 1967. The year suffix changed to “F” on 1st August that year because the motor industry said that changing both the year letter and the year on 1st Jan was causing bunching of car sales. The effect of the change was to bunch new car sales on August 1st!
   One assumes that the car was new when the “race” started, as the Essex registration suggests that Ford supplied it, so the year 1967 looks like a good call.
   

   Reply
   • Daniel Strohl says:

     June 24, 2010 at 9:22 am

     Thanks for the confirmation of the date, John. I constantly forget how useful British registration numbers can be when researching old cars. A gallon of blinker fluid for you!
     

     
     

• 
  

  Racing Heroes – Richard Petty
   

• 
  

  Lost Cars of the 1980s – Ford Bronco II
   

• 
  

  Skills 101 – Off-road driving techniques
   

• 
  

  Racing Heroes – Don

Recent Comments:

• Talltimber: You took the words right out of my

- See more at: http://blog.hemmings.com/index.php/2010/06/23/racing-the-windsor-castle-in-a-ford/#sthash.aZVG4kEB.dpuf

Curved wall shelves for all sorts of use and reasons.

The ask today was can we make some curved  shelves to support some gear.

 

Superform Bending plywood will work fine, we have been importing for twenty years now?

 

Wall shelves which are curved are really possible using Superform bending plys and Flexiform veneers.

 

Made deep enough you could also do a stack of wine bottles too?

 They would  look rather like these companionway steps!


http://ckdboats.blogspot.com/2008/10/companionway-steps-made-from-superform.html

Yes,  Superform bending plywood is also water proof, contact me for a stockist in your area.

 Each year we try and make some new design with Superform bending plywoods,we are the importers and distributors to southern africa (retail agencies are available)we work with the local Cape Technical Design College, when their design students are given a design and manufacturing task,Superform plys and Flexiveneers often are the only way to produce the complex forms they have designed.These steps involved a lot of design and manufacturing,jigs had to be made to form the steps,in this case laminated from three layers of 8mm Superform ply,we laminated the teak Flexiveneers to the top and bottom faces at the same time,it is important to use the correct hard grade of glue,especially when the solid teak front and rear edge strips are formed

Odd one but true.



Roy


 

Hillman Imp gets a Samcor Ford Electric Metallic Blue paint finish

The car is a one owner 1971 Hillman Imp Deluxe, its done around 90,000 miles and was imported to Cape Town when the owner emigrated to Cape Town, South Africa, since which time the car was in the care of two others but never registered as such.

The engine bay was sprayed some weeks back and in 2013, now we are into 2014 the work was done in the cars front compartment.

Work wise there were  at least four days spent cleaning and etch priming the area, the application of the  electric  metallic blue base coat and twin pack high gloss paints were the easy part! the choice of paint colour is a very close match to the original Roote/Chrysler one that was the cars original when built. The body paint you can see is not correct and in natural light has a purple shade to it, the entire car will be re painted to the electric blue metallic soon.

Roy 

BAR - Honda wrist watch

There is a simple reason why we do not see very many of these watches, they had only 100 made and this is number 99!

 

Click on the picture to enlarge it.

A friend of mine was given this very collectable wrist watch, its certificate came with the gift.

Can I find number 100?
Why be choosy, anyone of the others will suit me fine.

The story is about a talented South African race mechanic who specialised in gear boxes while working in the UK he was sent by his company to work in house at BAR-Honda.

Roy
 

Biaxial Glass Cloth, what is it?

This is a favourite of mine, its so easy to use!

The weave is around 45 degrees which makes it very easy to accept shapes and go into and around corners, use it with epoxy or polyester resins.

 http://ckdboats.blogspot.com/2011/02/new-replacement-holiday-23-rudder.html

The link shows a Holiday 23 rudder under construction and using the same glass cloth, epoxy and biaxial glass cloth are normal stock items .

Roy

Toylander Series 2 motor and metal parts

We have parts in excess of our requirements and available as long as they are unsold.

The 12 volt motor, control switch, 40:1 reduction gear box and drive gear, the drive gear requires fitting to the shaft, which we can have done for you. Note, this drive gear is far better than the bicycle gears normally used.

A selection of the metal fabrication parts, incomplete but I think about 75% of the parts in the manual are there. There is also steel wheels and inflatable tyres.

Prices on application and depending what you take, we are in Cape Town, South Africa but can post world wide, payment by Pay-Pal accepted.

CNC cut body panels can be supplied to order, please buy the plans direct from Real Life Toys in the UK before you place your order.

Roy
 

A Cape Cutter 19 stainless steel drop keel by Jorgen

Jorgen was a customer for a 316 stainless steel package from us, he built his boat from plans.

He has developed a method of fabrication of the drop keel, we normally supply these in a solid steel
plate with milled edges as per the plans but check Jorgens ideas out.

My thanks for Jorgen showing us his drawing and related pictures, click on the image for a larger view.

Roy

Hello Roy,

I have told you before about my ideas

of a Lead-filled Centerboard to my CC19.

Now I have come to reality with this plans!

I figured out that to topfill the Centerboard with Lead
is not the best optimization. With this manufacturing
method I can customize the best weight distribution.

I decided to fill the Centerboard to 200 mm under DWL.

Sending here a picture showing the Ballast Distribution.

Best Regards Jörgen

Check here also for more information on this idea.

http://ckdboats.blogspot.com/2013/08/a-new-drop-keel-idea-for-cape-henry-21.html