Chances are you have never seen one of these before,chances are you never will either!
Made by Churchill Tools to allow the lower row of Hillman Imp cylinder head bolts to be re tightened without removal of the camshaft,saving a lot of time and related down time and its cost.
The tool is cast then forged I think,not an easy process but a welded version can be made using a suitable 9/16"spanner socket at on end and a 1/2"square drive at the other end.
The inside faces are 85mm apart.
As seen from the cylinder head bolt end.
The two ends are not in paralell.
R McB
This comment has been removed by a blog administrator.
ReplyDelete