Just out,Sailing magazine has a full feature on the Dix Design paper jet,its only available as a kit,we sell ours for R10,037,this includes the plans which are valued at U$300,we pay those on the buyers behalf.
More information is available from
http://www.dixdesign.com/paperjet.htm
This is what we supply in our kit:
4mm OKoume Marine plywood
Sheets 1220x2440mm [8'x4'] - 6
Meranti, Douglas fir or white pine framing
12x12mm (stringers) - 14m, selected for straight grain
16x32mm (wing edge frame) - 5m
18x32mm (daggerboard casing) - 1m
19x19mm (daggerboard casing) - 2m
22x32mm (wing beams) - 3m
16x16mm Triangular (ex 22x22mm cut diagonally) - 16m
Cedar
10x32mm (gunwale) - 5m
16x82mm (wing leading edge) - 5m
Poplar, mahogany or similar
10x32mm (gunwale capping) - 5m
12x89mm (rudder blade) - 2m
16x40mm (wing edge cappings) - 5m
16x64mm (daggerboard) - 5m 19x25mm (wing leading edge cappings) - 2m
Glass etc
50mm glass tape - 1 roll
300g/sq.m [9oz/sq.yd] glass cloth - 2m [2yd] (sheathing foils) (extra 1m for Turbo bowsprit)
Laminating epoxy & hardener - 10litres [3 gal] total
No comments:
Post a Comment