Optimist kit packing crate

Over the years we have shipped kits of many sizes and designs to many parts of the world, this wood/epoxy Optimist kit leaves for the USA tomorrow.

The crate is secured with steel band strapping once the lid has been fitted .

Roy

North Sails with our kits

When requested we can supply North Sails and Harken deck gear with our boat kits.

This North Sail is for an Optimist kit that ships this week.

Harken deck gear for the Optimist dinghy kit.

North Sails and Harken deck gear are and optional extra.

Roy

Wood/Epoxy Optimist dinghy mast step dimensions

The so  called Unofficial Guide for the boat gives a mast step block as 100 x 180 x 60mm in size.

The drawing shows the footprint and the required shape.

We looked at the size given and then read the rules and saw that we can down size it to save weight.

So our Optimist Wood/Epoxy kit has a pre shaped mast step block in it, this one is laminated from three pieces of meranti wood.

The kit it belongs to will be shipped to the USA and with a North Sail and Harken deck gear pack.

Roy.

Proteus 106 on drying moorings

This picture shows why a multihull design can work when a monohull design will not.

This river is tidal, which makes little difference when you have a Proteus 106 design.

Plywood kits for this design are no longer available, when we have a replacement design we will post it.

Roy

Proteus 106 sailing pictures

The boat was built from a kit that Angelo Lavranos designed and we cut the plywood panels from his cut files.

The boat is 35.00 feet long and built to the correct plan specification, it sails well and has seen speeds of fifteen knots under sail.

This really is a right sized yacht for a catermaran when the needs are to keep things smaller but still have an ocean capable yacht.

The boat is on the East coast in South Africa.

Please note, due to the designer retiring, we can no longer offer this as one of our CNC cut boat kits.

Roy

The HBYC is to build a St Ayles Skiff.

The first boat was delivered today and as a CNC cut kit.

This pack of plywoods makes up one builders jig and one hull, a second or third hull ( or more ) can be built on the same builders jig, so a very nice cost saving.  

https://www.facebook.com/groups/1213474742125924/

This panel is part of the builders jig which will be set up first.

The team will start the building jig frames first, then proceed to the hull stave planking.

HBYC has come up with a number of builder options, one is you become a share holder in a boat, this gets you involved and even allows you to sell on your share at a later date.

Contact me for information and pricing.

Roy

The history of The Traditional Boat Association

Colin Davies wrote and had the book published, all proceeds on the sale of the books went to the NSRI.

I have five left and for sale, they cost R200 each and again the proceeds will go to the NSRI.

The book highlights the monthly meetings and talks.

I was asked to do a follow up publication and on the members many classic yachts/

Contact me for your copy of Colins book.

NSRI stands for National Sea Rescue Institute, it is not government funded and requires your support  please.

Pictured is NSRI Station 8 in Hout Bay harbour.

Roy

Jaguar 3.8 ltr S Type travels

After some thirty two years of ownership I sold my 1966 Jaguar S Type to a chap from Australia.

This was taken at the hotel Victoria Falls Hotel.

The car also went to Botswana and I believe that it has now returned to Cape Town and for a full rebuild.

Roy

Roys Hillman Imp new parts

I have been involved with the 1963 produced Hillman Imp and related makes for some fifty years.

https://www.facebook.com/groups/2032768506981532/

If you use Facebook you may want to view what is now available?

Twin Stromberg CD125 carburetor heat shield, made with 304 grade stainless steel.

There is a Word document with most the parts, send me an email and I will forward the  document to you.

Steering rack lower U shaped washers in 304 grade stainless steel.

Steering column top bush and gear shift lower ball, both  made from Vesconite which has 50% less friction than nylon.

Hillman Imp engine block shim, this one was 1mm thick, we can supply to various thicknesses and in either alloy or stainless steel.

Imp saloon front windscreen, in stock now ( no tint)

Rear wheel nut lock tabs, fronts also.

Roy

The Nelson Mandela memorial, Midlands Meander, outside Howick, KZN, South Africa

I recently had reason to be in the Howick Kwa Zulu Natal area, while there I was shown a remarkable art form, it marks what is named The Capture Site .

Words will say little, I trust that the images will?

All images were taken by Roy McBride, I used a Canon  G1X  digital camera.

Roy

The monument has to be viewed from 35 meters back from it.

The engraved plaque is in front of the viewing position.

The walk down the paved path has sheet metal signs on the right hand side, many have been removed, stolen ?

The sites view and position relates to the capture place, which is across the road.

Close up and there is really nothing much to see?

There are a number of web sites that name the designer and tell the reason this site was chosen.

Being too close or far away to the work will loose the effect that the designer of this art form wants.

Hout Bay and the St Ayles Skiff

The first meeting, which was  open to the general public, was held in the HBYC last night, such was the interest that I think some sixty people turned up to see the promo on the design.

Paul the HBYC Commodore opened the meeting and explained why he was giving his full support t a rowing boat class in the club.

There was a lot of interest in the production that was put up on the big screen, build and launch pictures, racing too.

The club has allocated the  ground floor area of the club to members who want to build their own boats.

The basic costing are now known please contact myself or the HBYC for more information.

Roy

The St Ayles skiff to be produced in South Africa

Plans are well under way to produce both kit sets and completed boats here in Cape Town, South Africa.

We are working with the HBYC in Hout Bay to start the class and use the boats here in our local bay.

Kits will sell starting at R40,000, which is about U$3100, or Pounds 2350, we can ship country or Worldwide.

Please contact me for further information.

Roy.

Cape Henry 21 for sale

This Cape Henry 21 was built in 2012 by a local boat builder to a high standard  and from one of our CNC kit sets, it is now for sale.

The boat has bilge keels so can move and park in shallow water, the boat sails really well with those keels which has now become a standard option.

The boat has full safety gear for local waters, a VHF and a Chart plotter, also a 15hp inboard diesel engine which will give the boat many options when motoring.

The boat is in Cape Town, South Africa and could be shipped Worldwide.

The price is R425,000 or U$35,166 .

Contact me for more details,

Roy

Viola 14 car topper

Designed to be light and fast!

The idea of the Viola 14 is to mesh an easy to transport canoe planform with the stability and planing speed of a racing dinghy hullshape

It is meant to appeal to dinghy sailors that are tired of lugging big heavy boats around and find the RS Aero just too expensive. It has three rigs for sailors of different weights and genders. We make the sails at very reasonable prices.

The boat has participated in the Dorestad RAID in the Netherlands where it proved to be one of the fastest boats and surprisingly for a virtually open canoe it was able to keep going when the bigger boats were not and decided to pull into shore.

It is 75lbs stitch and glue and comes from four sheets of 4mm ply. Quite a lot of filleting is used so the timber list is much smaller than many similar boats.
https://www.youtube.com/watch?v=fuZ62Sz1i1o

Contact me for prices .

Roy

Cape Cutter 19 kit news

We have the good news that we can start offering the Dix Design Cape Cutter 19 kit once more.

CKD Boats cc were the first company to CNC produce this design.

The  picture above  shows boat number one being built in Cape Town, South Africa.

This Cape Cutter 19 was built from one of our plywood boat kits, we also supplied the mast and spars, plus the CNC shaped steel drop keel.

Contact me for pricing, we have recent prices showing the plans fee, the plywoods options which offer a range of prices to suit your pocket.

Shipping Worldwide is an option.

Roy