Andrews Hartley 37 build of the decks

It is always nice to be able to report on a boat we have supplied a kit or materials to, the strike rate on the boat by folk buying from us and being launched is remarkably high by the way, some take weeks, some take years but as a general rule they all seem to splash in the end.

From Andrew Rogers:

I have now fitted the Deck Carlines and am busy with planing them down to

the correct position as well as planing the sheer in order to fit the side
decks. The piece of timber which I cut the carlines from had a curve, which
I left, as it saved having to shape the carlines to take the curve of the
deck. Note the bulkhead which was temporarily in place has been removed in
order to fit the Carlines.

On Monday I took delivery of my final batch of Marine plywood from Roy and
Jean at CKD Boats. This will hopefully be all that I need by way of plywood
in order to complete construction.
 

Andrew designed and made a very nifty rack with built in clamps that allows him to move sheets of plys on his road trailer, click on the picture for a better view.    

Wooden boats really can progress very quickly when you get into the build process. Its really a matter of various repeat tasks, in the end you find you have built yourself a boat!

http://ankro-andrewrogers.blogspot.com/

Check the link for Andrews build and ideas. The words below are from it and I will watch with interest how Andrew develops his power plant.

TIDIDI is a Hartley designed Cape Otway, plywood yacht which I am currently building in my spare time and as cash flow allows (all donations welcome). It is therfore a long term project and is ultimately for my retirement.
She has a length of 37 foot and a beam of 11 foot, with a 6 foot draught. She will have a sloop rig and an electric auxiliary, much to the concern of some people who seem to prefer the smell and mess that comes with Diesel, not to mention the weight and space requirement.  I intend to make her as green and eco friendly as possible.


All pictures are the property of Andrew Rogers.


Roy
 

Dave and Wendy launch their Didi Mini Transat

Hi Mates,

We launched our boat today!

We have named her Dog Year. Photos are on the website:

http://www.dandwboatworks.com./

Thanks for all your help and support.

Dave & Wendy

Well done Dave and Wendy, thats a fine looking standard of finish on your boat!

Dave and Wendy placed an order for his Didi Mini Transat kit with us a few years ago, we then packed it and shipped to them in Arizona, USA. The shipping cost was very reasonable, in fact, it was under R4000? thats only U$487 at todays exchange rates. Dave did his own collection from the port, which we do recommend to all our kit buyers if at all possible.

With this kit order we also supplied the black epoxy coated alloy pulpit, pushpits and deck stantions, the lead hot pour ballast as well.

http://www.dandwboatworks.com/  check the web site for a stage by stage trip through all the various stages  of building this boat.

Roy

Found In Hout Bay, a rare British Anzani outboard!

British Anzani models (1957)

(Based on a 1957 advertisement) taken from the British Seagull Spares site, many thanks.

Keen edged performance is the quality that outboard enthusiasts look for... and it is just this that puts BRITISH ANZANI ahead in the world of outboards.

More than that... effortless starting, low fuel consumption, smooth running and simplicity of operation are consistent throughout the British Anzani range - from the 1 1/2 h.p. 'Pilot' for canoes and rowboats, to the 15 h.p. 'Unitwin' for runabouts, etc., and of course the 'B' Class Competition Motors.

Petrol is now off the ration... but the ever-present need for fuel economy underlines the wisdom of choosing BRITISH ANZANI.

Sets the PACE... provides the POWER!


Seen in the harbour today.

I think this is whats named a Super Single which weighs 48 pounds.

This is Paul, aka Blue Bottle, named after his inflateable boat we see him touring the harbour with. I had always thought he used a British Seagull engine, it turns out to be the British Anzani with a Seagull fuel tank fitted.

Pauls Blue Bottle and wheels ready to go.

As you can see, our winter is over and its now a nice spring day in the cape.

Paul with his classic 55 year old British Anzani outboard engine.
Roy

http://ckdboats.blogspot.com/2009/03/bluebottle-and-pirate-ship.html copy and paste the link to see the boat in action.

News on the motor has just come in from John of S.O.S in Essex, England.

Hi Roy, just back from a sunny stay in hot climes!  UK actually warmish and sunny today!

Re spares for this beast, sadly none have been available for 50 years or so, they are museum pieces these days only parts are from other scrap motors and not sure if there is anyone specializing in them here, never found anyone and always asked...... Italian motors really, The Marine side just a small part of Anzani.

Regards,
John
SOS

Brum is a Toylander

Seen here and specially labled for Ben, our six year grandson, Brum looks out on the future.

The car is easy to build from one of our ockume marine plywood kits, we can even supply the laminated bonnet and two curves to the front wings!

Roy

The SKF Speedi-Sleeve

SKF SPEEDI-SLEEVE (they are simply too expensive!)

A refurbished Hillman Imp lower crank pully, note the Speedi-Sleeve that is pressed onto the shaft.

SKF SPEEDI-SLEEVE is a well-proven solution to fix worn shafts within minutes, providing an excellent sealing surface without having to disassemble the shaft or change the seal dimensions.

A Hillman Imp transaxle output shaft, note the groove in the shaft, this needs a 1.25" Speedi-Sleeve fitting.

The sleeve combined with an SKF radial shaft seal provides an enhanced sealing system, resulting in a consistent and increased operating durability. This improved service life predictability assists with maintenance planning. For large shafts, SKF can also offer wear sleeves for heavy industrial applications.

The shaft has a deep groove where the old lip seal was fitted, the Speedi-Sleeve will cover this and make the part like new again.

I will update this with a picture when SKF reply to my email asking for stocks and prices.

Roy

Stocks are in Johannesburg and the order has been placed.

The asking price for one was around R601.00 plus Vat, so R685, or U$83.55 each and then delivery, they offered me a miserable 5% trade discount only, I canceled my order and went to an engineer I use when in need.

The original and damaged shaft is the one in front, the engineer made his own sleeve and turned it down to the required 1.25 inch size, the price was just R125! plus vat, so R142.50 only, thats all of 75% less than SKF can sell a sleeve at, I think they are way
over priced now.

See the quality!

You can use your own judgement on a quality job and good local prices at our machine shop.

Roy

Oils for older petrol engines (revisited)

I had discussions with two classic car drivers yesterday, one was Colin with his 1952 Bradford Utility which became his Jowett Special, its a good read as the book he wrote and published named Myra (some copies may still be available)

Colin Davies with a copy of his book named Myra, he is standing next to our 1967 Singer Chamois.

This car is now some sixty (60) years old, its supercharged and was a succesfull entrant in the Lands End Trials in England, Colin tells me that as far as he knows, only one other Jowett exists in South Africa? The front suspensions are of interest to my self, the uprights and the steering rack are pure Hillman Imp!

The other asking for information was Terence and up in Johannesburg, he has just fitted some new piston rings I supplied him for his race Imp. The engine is in his  Imp and was suffering from smoke, thought to be caused by faulty piston rings? I mentioned to Colin and Terence that the oils we are offered today are very different to those sold when our cars engines were designed. (he has been using Shells 40 grade diesel oil, I have no idea if this is a good idea or not?)

Dudley Dix in the USA found an item on the Lotus Europa Forum about this subject, its based on the fact that older oils had more solids in them than modern oils.

Interesting and controversial stuff. There was a lengthy discussion about oils and additives on the Europa Forum a few weeks ago. From that I understand that oils of a few decades ago contained much more zinc, boron and sulphur and that those minerals were needed by the engines of the time. Modern engines are made from much harder alloys and they don't need as much of those minerals, so modern oils have much less in the interests of lower emissions. That leaves the classic cars out in the cold, with modern oils inadequate for their engine needs. This applies particularly to motors with flat tappets, which wear badly without enough sulphur. They need either additives or oils that contain more of those minerals than standard. I will research the database before I fill up my motor after rebuild but I think that the outcome was that there are some racing oils that do have what is needed but most of the off-the-shelf oils don't.

Regards,
DD

You will find this information in the link below,its very good reading!

I use both of these makes and to good effect, the Singer uses no oil at all with the Shell HX5, its the same with the 1966 Jaguar 3.8S type and with Castrol GTX for older engines, no noticable oil use at all.

Roy

PS, you need to read this blog to get a better idea on the subject.

http://ckdboats.blogspot.com/2011/08/additives-in-oils.html

Note, the oil I mentioned as being our normal Imp 998cc race engine choice was Duckhams Q20, that was a 20-50 grade and the race Imp ran very well on that oil, do Castrol now own Duckhams?

http://ckdboats.blogspot.com/2011/08/shell-oils-new-lubricant.html

This blog covers Shells new offering and is not the oil I am using in my older car engines.

Cast Bronze and 316 Stainless steel, precious metals

I went out to the trade store in Paarden Eiland (horse island) yesterday, needing some 316 stainless bolts and nuts, plus some dome headed machine screws to install a new cast bronze Blakes sea cock with.

The 316 stainless parts cost retail a whopping R143.56!  thats around U$17.48 right  now?

The good side is I could find what I required and in one store, the threads on the larger bolts are very rare (today) UNC (unified course) and could be hard to find in many places ,Brasil comes to mind? That thread and its nuts and bolts are still used on engines like the British Seagull. You can use a Whitworth spanner on such bolts.

Dissimilar metals? I have used stainless with bronze in this application for many years and never had any bothers, I did not even bother to ask for bronze fittings, imagine the price!

I guess the bottom line is we can at least find such uncommon threads and off the shelf, the sales guy was so well trained that he did not even check the threads gauge, just the diameter, which will be Imperial and 9/16 of an inch, he knew by sight that the thread was UNC.

Shopping for your yacht when in Cape Town makes good sense!

Roy

Jump to: navigation, search


The Unified Thread Standard (UTS) defines a standard thread form and series—along with allowances, tolerances, and designations—for screw threads commonly used in the United States and Canada. It has the same 60° profile as the ISO metric screw thread used in the rest of the world, but the characteristic dimensions of each UTS thread (outer diameter and pitch) were chosen as an inch fraction rather than a millimeter value. The UTS is currently controlled by ASME/ANSI in the United States

http://en.wikipedia.org/wiki/Unified_Thread_Standard   My thanks to Wikipedia for supplying this information.

Yanmar 1GM10 small diesel for sale

This motor was sold 16th October 2013, via the power of this blog!

What have you got for sale?

This has just come on offer, the engine is an early model and puts out 6.5hp at 3400 revs. The 1GM10’s power is 6.5Hp @ 3400RPM continuous.

It will suit a small boat or a generator set, say to 3kva? it can be supplied tested and fitted with what ever new parts it needs. Plus painted of course, there is also a small
gear box that should suit the engine well.

A file picture of the later 1GM10 and with a gear box.
 
Roy

Dinos new boat, the Cape Henry 21

We will be featuring this boat quite often soon, they will launch it and moor it in Hout Bay,Cape Town, so for me it will be close by.

Built by Peter Randle Boats, we can repeat this build to order now. Note the bilge keels, an idea once common and for some cruising this idea makes so much sense.

All pictures were supplied by Dino the owner.

This really is a lot of boat in just 21 feet in length, the kit was delivered to Peter Randle only last November, now its a boat and ready to sail.

The Cape Henry 21 will normally have an outboard motor, in this case they found a servicable 1gm10 Yanmar diesel.

Lots of inside space and made larger with the fitting of the bilge keels, as otherwise there will be a box to house the drop keel.

Yacht Stellina, SA4335 and nearly ready to sail.

How nice is that!

Roy

World Cruising Club

Do you dream of being here?

Come to the Ocean Sailing Forum to find out how!

Dear Roy

Ocean Sailing Forum

Saturday 15 September, 10am to 12 noon
Southampton, UK

If you dream of sailing off into the blue, anchoring in turquoise waters and exploring far-off lands, but are unsure how to make your dream come true, then come to the Ocean Sailing Forum on the first Saturday of the Southampton Boat Show.

What is the Forum?

The Forum is a two hour panel discussion that covers topics such as preparing your boat, selecting equipment, sails and sail handling, life onboard, crew management, route and weather. The panel will share their expert views and opinions, giving you the chance to learn from the experts.

The Forum is only £15 per person, and includes a free one-day ticket for the PSP Southampton Boat Show and the latest copy of Yachting World magazine. Great value for money! Places are strictly limited, so CLICK THIS LINK to find out more and book your place.

This looks like fine value at only 15 pounds (plus the air ticket)

Roy

Ferrari at Hout Bays Mica store

Was this Ians new car I was thinking, turns out a guy named Gavin owns the car. We had a chat about the fact that while a Ferrari may be seen by some as just another fast car, it also is in real terms a work of art?

Even the brakes are badged Ferrari!

What has this to do with boat kits you may wonder, the answer is nothing much unless we suddenly sell lots and lots more kits, the truth is I just love the style and quality of such cars.

The way I look at it, well someone has to own and drive these cars, why not me?

Roy

A 1956 Dragon gets new teak cockpit floor grates

They needed re making, as the old mahogany ones had passed their prime, cost wise to replace with the same wood was the cheaper option but in the long run teak was the choice. We had the right quality in stock, a timber yard did the machine work and Will did the joinery, as you can see he did an excellent job!

One margin board still has to be fitted, the planks are a healthy 16mm thick, this means better support and a longer life.

The Dragon class sailing boat is a day sailer only, this one sailed in the 1957 Olympics in Melbourne,Australia.

Genuine teak (tectona grandis) requires no sealant or varnish.

Will has done a great job of shaping and fitting this cockpit sole, the owner just loves the look and feel of real teak on his feet.

How nice is that!

Roy

Ian heads south to the Indian Ocean

Ian Baker arrived at Hout Bays HBYC marina a few weeks back with a broken Windpilot wind vane system, we found him a spare berth and he soon settled in while the engineers who had fixed the vane gear in Cape Town re fixed it!  The boat is named Stella and Ian tells me that the boat is a Raffiki 35 and built in Taiwan, the design is by Stan Huntingford of Canada.

Single handing has its moments when your leaving port, other cruisers were on hand to accept Ians dock lines.

Ian ready to cast off, some other yachties are lending a hand.

Motoring out of his sea facing berth.

Ian was some 190 mile south of Cape Point when his repaired vane gear broke, he was heading for around 40 degrees South where he would then turn to Port and travel along the expected winds down there.

The dock lines from the boat to the left were replaced right away.

On his way and into whatever the weather may be as he heads south.

All pictures by R McBride.

Roy

The D and W boatworks in Arizona,USA

Progress has been slow but good, Dave and Wendy bought a Didi Mini Transat kit from us some years back, they now have the boat close to launch day.

We also supplied the lead ballast bulb sections and the deck fittings such as the stantions, pushpit and pulpits.

http://www.dandwboatworks.com/

Roy

Septembers i550

We have been asked to cut an i550 sailing skiff this month, we have the plys paid for and in stock, thats 6mm marine plys and with a five veneer layup. When we know the exact model to cut we will post progress on the blog.

http://www.i550sportboat.com/

Kits and plans can be bought from CKD Boats, right now the plans are on a special discount offer of U$100   less than normal.

http://www.youtube.com/watch?v=-IuxBKmTRyE

Roy