Thursday, 25 November 2010

Fluid Film make over test,the proof is in the pictures.

A 25 year old BMW control panel as found abandoned and with two days of rain soaking.
Left click the pictures for a closer view and more detail.
Fluid Film is ideal on metals and plastics,battery terminals,wire connections,rigging screw assemblies,winches and engines to stop corrosion and decay.

CKD Boats are stockists for Fluid Film products,now in Hout Bay and ready for the ARC Around the World Rally fleet,some of whom are already on the Hout Bay Marina.

The BMW (hatz) D35 twin cylinder 30hp motor with a ZF transmission.


Found abandoned and full of rain water,this BMW D35 30hp twin cylinder control panel, was in a very sorry state as I found it on the dock,dumped after a change of engine to a Volvo diesel. As a test I thought to proove just how good Fluid Film really is,its easy to apply,takes a little time and a small artist paint brush can help in application but just look at the results!


Not quite a new panel but Fluid Film was the answer this time.

Also perfect for classic cars like Jaguar,MG,Aston Martin,Sunbeam,Singer,Hillman,clean your engine and apply Fluid Film,it may collect a little dust but corrosion will stop.

Read more below,
Fluid Film products offer powerful corrosion protection for all metals and superior lubrication for all moving parts. They are long lasting, thixotropic liquids and gels that have been used for over 55 years in the highly corrosive marine environment of ships and offshore drilling rigs. More recently they have been introduced and successfully utilized in the lawn & garden, aviation and automobile industries, as well as providing an eco friendly solution for home maintenance. Facilities where they are used include government, commercial fishing, gas companies, farming, salt, power, and industrial plants.

Fluid Film is formulated from specially processed wool-wax, highly refined petroleum oils and selected agents to provide corrosion control, penetration, metal wetting and water displacement. These long lasting products contain no solvents, will not dry out and will penetrate to the base of all metals, providing corrosion protection from both natural and industrial atmospheres. Heavily corroded and/or frozen parts such as nuts, bolts, shafts, etc. that would normally be damaged during maintenance, can be salvaged by applying Fluid Film

Roy

Phone on 021 790 3859 Cape Town,South Africa,or kits@comlumber.com we can post to your destination.



No comments:

Post a Comment