The CKD Boats cc factory

We rationalised things and moved to a full out works company some time back.

For over ten years we used the premises on the left of this picture.

Now things are in more control and we can keep our prices at a lower rate.

This must still be finding favour as recently we have exported three times, the exchange rate helps of course.

Roy

Marine plywood water tanks in a boat

After some eighteen (18) years in service I decided to remove the boats six water tanks and see what they look like inside?

Yes, this boat is in the water and yes the bilge really is that clean and dry.

This was a big job but as I was not under any pressure to complete the work, I took my time and fitted them back in the last few days.

The tanks were fine and clean enough inside not to worry about anything, drinking the water is at least as nice as the domestic water from our taps back home.

Each tank was pre tested prior to re fitting in the boat.

There is a carbon filter but I wonder just what it does as the water is always clean and there is never ever any sediment or bad taste in the water.

This time I removed the tanks inspection covers, bonded them over and also bonded in the brass nipples for the access and vent pipes, so there is nothing to worry about now.

Roy

The CKD Boats cc advertising sheet

We send these out from time to time, the sheet indicates some of the projects we have supplied and some of the products we can supply.

Superform bending plywood for sale

We have a 20ft FCL of Superform bending plywood due, all but 90 sheets of 5mm cross grain are pre sold.

Please contact me to purchase the unsold sheets, packed into crates of 15 sheets each its easy to buy and easy to move.

Roy

Please note, we pre sold the last 90 sheets as mentioned and all the plys were delivered to the customers as of 23/03/2016

Contact me to pre book and place your order on our next shipment.