Big boat forged Steel Bruce anchor for sale.

This Bruce anchor weighs twenty Kilos, (20) and will suit a larger sized yacht.

The anchor is in  Hout Bay, South Africa.

The all steel Bruce anchor is some of the best insurance we can trust to anchor our boat too.

Forged steel and made in Belgium, beware of cheaper cast iron and welded copies.

Used lightly, the hot did galvanizing is in good condition.

R4500 ex Hout Bay.



Roy

Bruce forged steel anchor

Made in Belgium and the genuine product.

I have cruised for years with a Bruce anchor, South Africa, Brasil, Trinidad and Tobago, Venezuela and also deep water places in the South Atlantic Ocean, never did we drag anchor when using the Bruce.

Probably for a South African base yacht or one passing through?

For myself this is the best anchor.

The ten kg size will suit many yachts and up to around 35 feet.

Please remember this is made from Forged Steel and has no dubious welds to fail.

The price is R3000  ex Hout Bay, South Africa.

Roy

The 10 kg Bruce has been sold, the larger one is still available.

BMW D35 heat exchanger

This may also fit the D55  BMW/Hatz marine diesel engine?

This unit had a new 216 stainless steel end cap made and fitted, the original one being cast iron.

Cleaned by removing all the old paints and re painted with DTM metal paints.

The heat exchanger would work on other engines when an adapter was made.

Contact me at www.ckdboats.com for pricing and postage.

Roy

BMW D 55 marine gear box

This ZF box came off a D55 BMW/Hatz marine diesel, it had been serviced and fitted with new bearings before I got it.

The case was stripped and repainted with DTM metal paints.

The gear reduction ratio is stamped on the makers plate on the back of the case.

The gear box is clean and ready  to fit, use engine oil as lubrcant.

The ZF plate on the back of the casing gives the series numbers.

To contact me to discuss the price and delivery please use the 'Contact ' button at www.ckdboats.com you will then be able to email me.

Roy

Hurth 75 horse power marine gear box

I have a marine gear box that came off a Volvo MD21 75 hp diesel engine.

The ratio looks to be 2.1 : 1 , the casing was stripped of all paints and recoated with DTM silver paint .

The old paints were removed totally.

The offer can include the drive plate and the bell housing.

The bell housing is alloy, it also has a steel connection plate spacer to the engine.

The drive plate is a rubber disc and in fine condition, as are the splines.
.

The unit looks to have had a low hours use?

Please contact me to discuss options, use the Contact button at www.ckdboats.com

Shipping Worldwide is possible.

Roy

Sailing yacht head sails

The first image shows similar sails and on my own boat, the two sails on offer are from the same suit of sails, they were never used and are now for sale.

I have a number one Yankee cut jib and a number two jib, both were intended for an Endurance 48ft yacht, they were never used, not even once.

The two sails are brand new, one was removed from its bag for inspection only.

They are suitable for a yacht 45 feet and larger,

With bronze piston hanks, a luff tape can be fitted at an extra cost.

Priced at less than half of new sails today.

Sizes available on request.

Top quality new sails.

Please contact me for dimensions and pricing.

I can ship Worldwide.

Roy

www.ckdboats.com 

B and G marine gear

Lots of Brookes and Gatehouse parts in stock.

The Hornet 4 on the right is at this time not for sale as I use that for testing the Syncro repeaters and Network equipment.

The ACP1 auto pilot is for sail, there is also a PCB panel to convert it to an ACP2  pilot.

The Hecta dept sounder requires a service but can be for sale.

Contact me for pricing and postage cost.

Roy

Aries vane gear self steering rope to wheel drum

This is a genuine Aries rope and clutch drum and related parts.

Made and supplied by Aries of Cowes I.O.W in England.

Most of what is required to fasten to a steering wheel is in the offer.

I have used the rope clutch but it has been well cared for and looks nearly new.

The price is U$450  plus postage.

Roy

B and G Network tack instrument

The Network Tack has a number of features suited to racing yachts.

They include, AWA- TWS - TWA - VMG - plus Lights.

Contact me for price and postage .

Roy

Network Quad by BandG

All button functions work, will be re tested prior to sale.

The Network Quad multi functions and shows Speed, Depth, Timer / Depth, Setup and lights, suitable transducers are required for speed and depth.

Contact me for price and postage.

Roy

Band G Network GPS plus display

This GPS plus  Network control was a spare, it requires a remote GPS receiver to show the postion, the Garmin GPS 35/36 works well with it.

I can test the functions by applying power, I cannot test the GPS function as I do not have a suitable GPS to connect to it.

Contact me for price and postage.

Roy

B and G Syncro repeaters

I have a number of the larger Syncro repeaters, they are suitable for below or above decks.

Sold as tested and working.

Syncro repeaters will work with the Hornet 4 and also the Network BandG gear.

Clean and in nice condition

They are in a nice condition.

Tested with my own Hornet 4 spare computer, 

Please let me know which ones your interested in, I will then test them with my Hornet 4 computer and spare  496 MHU that I use for testing.

Roy

Hecta depth sounder

This B and G Hecta depth sounder was my spare unit and kept as a back up, tested and working just in case it was required, which it was not.

A re test two weeks back and the function buttons were not working, it will be sold in working condition.

It is in nice condition and the PCB shows no sign of intrusion from damp or moisture.

As tested in 2016.

No depth is shown as the transducer was not connected.

Simple wire connections that you can do yourself.

Please contact me for price and postage to where ever you are.

Roy