A Stornaway 16 in ply/epoxy.
This was not one of our kits, we did not even supply the materials, then a request for a mast and spars came in. With that as an order we also supplied the International Paints required to spray the boat, that and the advice he was asking for about the paint process and what type of spray gun to use.
This was not one of our kits, we did not even supply the materials, then a request for a mast and spars came in. With that as an order we also supplied the International Paints required to spray the boat, that and the advice he was asking for about the paint process and what type of spray gun to use.
Thats a nice looking hull shape, its a multi panel build, the drawing has been CNC prepared and I think we can now offer it as a kit. You will need to buy the plans from Selway Fisher first though.
This is the best gun to use, its a high volume low pressure gun, gravity feeds the paint and you need no more than 2 bars of air pressure to feed it with (28 pounds) with an even lower pressure you will find there is very little over spray.
No comments:
Post a Comment