Monday, 6 December 2010

Hepolite Piston quality is hot stuff

Pre heating a Powermax piston on heat setting number 5,the piston cools as you slide the pin in,this requires further heating as the piston then re heats to regain temprature.

The polished steel gudgeon pin is  fitted to a hot alloy piston,the circlips must still be fitted using a set of circlip pliers.
The new plus 60 thou, Powermax pistons fitted to a 1966 Singer Chamois Sport engine block (hillman imp) this is the maximum over bore an Imp block will go to without fitting new liners and pistons.The new piston set take the normal 875cc block out to 916cc.

These pistons are made in England and by a company named Hepolite,which is an AE group member,sold under the brand name Powermax they are made to the highest quality available at the time.Piston pins are quite often a simple press fit,no so with these Powermax piston pins,they are highly polished and the piston has to be preheated before the pin will fit the new bearing fitted to the conrods small end bearing.

No comments:

Post a Comment