We have changed the build materials we offer to an existing design in alloy,the idea was to
offer it in ply,the cost to re draw the plans was just too large an item,so now we will offer the boat as a CNC cut kit and in alloy.
DRAFT 1.100 METERS
There are a number of proffesional alloy boat builders in Cape Town,so pre built hull and decks may also be an option?
R McB
offer it in ply,the cost to re draw the plans was just too large an item,so now we will offer the boat as a CNC cut kit and in alloy.
10.5 METER POWERCAT
This Wright & Lavranos 11 powercat design is developed as a "cut file" kitset, so that the hull is CNC cut and delivered to the builder precut & labelled. She was built for a Motueka based client who uses her for a taxi service in the Marlborough Sounds, carrying twenty passengers as well as for charter fishing, with 8 passengers.
The boat has a top speed of 22 knots fully laden, and comfortably cruises at 20, with a pair of Volvo TAMD41P engines (147 KW each @ 3800 RPM), driving 560mm x 4 blade Henley’s Tiger props through a ZF 2.56 reduction gearboxes. She is an outstanding sea boat, soft-riding and with excellent wing deck clearance, and with good spray damping she is very dry.
The very large self draining cockpit provides excellent access to the motors and is equipped with a bait tank, pot hauler, bait table, rod holders, fish box, and lots of storage and seating. The shower and toilet compartment is accessed from the forward end of the cockpit. The saloon and galley area is around the helm station, and there are a pair of double cabins with berths for 6 down below. The saloon settee and table is also convertible to a double.
LENGTH OVERALL 10.500 METERS
BEAM MAXIMUM 4.550 METERS
DRAFT 1.100 METERS
There are a number of proffesional alloy boat builders in Cape Town,so pre built hull and decks may also be an option?
R McB
No comments:
Post a Comment