Hout Bay from above

Taken from the viewing spot on the top of Chapmans Peak Drive,this shot gives a clear view of almost  the entire bay.

Picture by RMcBride using a Canon G11 camera.

Dix 43 on the RCYC slip

Seen here after a bottom job,this Dix 43 is ready for the water again.The hull was built using the Dix Design Radius Chine method using wood and epoxy,the hull on this boat was built by one man in just six weeks.

The Lipton Cup

I was thinking about doing a story on South Africas own Lipton Cup,there are a number of others,the story never happened but may do in time,how many have seen our Lipton Cup,not so many I think,so here it is.

Roy

SV Coral circa 1906

Hout Bay is special in many ways,it has its own history but also attracts boats which themselves are a part of history,SV Coral is one of them.

Seen from a distance on the north wall inside Hout Bay harbour,the next picture will give you a better sense of Corals size,left click any picture to view in a larger format.

Coral is 86 ft on deck ( i think) so with her bow sprit we are talking about a seriously big yacht!

The front end

The center

The back end.

The boat looks large now but you should see it out of the water as I did many a time when I made timber and plywood deliveries to Stremple Marine in Woodstocks Tide Street each week.the decks were relayed using 18mm plywoods,which was then over layed with solid teak,properly sawn and fastened down.The masts,booms and spars are all made with the Birdsmouth method using oregon pine (douglas fir) glued with phenolic (recourcenol) resin glues.

Ernst VD Laan did the sail plan,also designed the new steel box keel shoe and new rudder,which is also steel.The hull is on oak,with teak to the waterline,after which it is mahogany.Sails were made by Doyle Sails, using a soft type dacron,its off white and really looks the part.The cordage was supplied by Wilbur Ellis Co,its a really nice layed rope in a soft feel fibre,which I think is polypropylene? The mast hoops were made by Charles,at Woodbenders out in Somerset West,details details!

Here for a film shoot,she was very busy the following day.

As seen from a distance and a tele lens.

A new blog spot @ http://sayachts.blogspot.com/

Justin Philips of the HBYC has a great idea to feature South African boats,this sounds simple and an easy task,there are not many,or are there,thats what we found out,the list is impressive,so are the designs and voyages many have made,check the new site out at http://sayachts.blogspot.com/

ARC HBYC start leader,yacht A Lady

Left click to see in a larger format.

The mountain is The Sentinal,the landmark of Hout Bay.

12 noon and Hout Bays East Fort seventeenth century cannon fired and the assembled ARC Around the World fleet were on their way,this one is an Oyster 56, she carries an Irish flag,with a sail number IRL 1758. Bon Voyage!

Yacht A Lady
Owner: Stephen Hyde
Design: Oyster 56
LOA(m): 17.49
Flag: IRL

Sail number: IRL1758

Photo by R McBride using a Canon G11 on auto setting.

Farewell! Saturday, 8th January, 2011

From the ARC web site today (sunday) one boat has already done 142 miles.


There was good southerly breeze blowing into Hout Bay this morning which provided sufficient drive to get the World ARC fleet across the start line and on their way across the South Atlantic. The fleet tacked out of the bay until clear of Sentenial Point and then set a course for the mid Atlantic Island of St Helena, where each boat will stop for 72 hours to break up their journey.

Having slipped their mooring in Hout Bay Marina in good time, to get a feel for the conditions in the bay, the first boat across the start line was the Hallberg Rassy 40, Eowyn, followed by the Portuguese boat Thor VI at the other end of the line. Third across was the Irish registered yacht, A Lady, who had slipped their moorings in central Cape Town earlier in the morning to meet up with the fleet at the start line.

The remainder of the fleet crossed in succession, some a little uncertain on which tack to be on with an unbiased line. But as the fleet cleared west of the entrance to Hout Bay and into open sea, they were able to head north and really benefit from some great sailing conditions.

There was plenty of chatter on the Rally radio frequency following the start as one and all wished everyone a safe and enjoyable passage across the Atlantic. Several local yachts from Hout Bay Yacht Club also mingled with the fleet to wish them well and wave them on their way. It was a really great send off and the fleet were very appreciative of the hospitality that they have received during their stay. Thank you once again!

The passage to St Helena is approximately 1700 nautical miles and the first boats are expected to arrive around the 18th January.

ARC Around the World Rally starts in HBYC waters today!

HBYC has enjoyed having the ARC fleet here,being over a christmas season it required special effort from the marina team,this included laying seven concrete mooring blocks,chain and risers to hold the larger yachts.

ARC entrant,yacht Chessie who had a full service,incluing a new rudder,genoa,mizzen,engine service,impellors on the bow thruster and a new bottom paint job too.

Just two of the large cats that will be on the start line at 12 noon today,next stop is the island of St Helena,thats around 1740 miles north west of Cape Town and with luck,a nice down wind sail most of the way.

Transom view of some of the ARC fleet with Hout Bays Sentinal mountain behind,from this angle it looks like and old lady lying down?

 

Chessies new blue rudder

Seen this morning,Anna Woolf took the picture of Charles (to the right) and myself with the new rudder,which Anna painted yesterday with International Paints Micron Antifouls .Charles will fit an annode to the rudders heel fitting this morning,then Chessie goes back in the water to be made ready for the ARC Around the World Rally start on saturday at 12 noon.

Irwin 54 rudder fitted

We can make new rudders for just about any brand of yacht or boat.

A close fit

The new rudder shoe and vesconite bearing,the bolts are now increased in diameter also.

Final cleaning up will be done before the Interprotect primer is applied.

Seen in the Hout Bay Boat Yard

I saw this a week back,sort of beats a dolphin or a mermaid?

Chessies new rudder

The rudder was delivered and when I left,Charles and Steve were about to lift it into place.

The guys arrive to collect the new Irwin 54 rudder,we loaded it together but weighed it first,the scales tipped at 82 kgs!

The next stage is to lift the rudder up,to make this a lot simpler and almost a one man job,there is now a removable screw in top eye bolt,this means the boats mizzen winch will be able to pull the rudder into place,the rudder

 heel shoe is removable.

Irwin 54 rudder etch primed

This is always a nice part of the job,it finishes the process as far as we are concerned too,the next step is to hang the rudder and apply International Paints Interprotect primer.The paint we have used is also an etch primer and a twin pack,two coats with a foam roller covers just about anything,it will etch to metals,epoxies and GRP.

The job needs two more applications on the otherside,I can then close for a bit of a break having worked through the Christmas and New Year holidays,there was little choice if yacht Chessie,the Irwin 54, this rudder will fit, was to have a chance of starting the next leg of the ARC Around the World Rally next saturday the 8th of January 2011 starting in Hout Bay.

Left click either picture to view in a larger size.

The Irwin 54 rudder glass work

Next will be sanding and  filler coats of  more sanding epoxy to fill up the grain from the biaxial weave cloth,we then fine fill with our Pro Fair fairing filler.

Each section of a build like this is a series of processes,all repeats  in many ways,its time consuming for sure,here we are applying the biaxial glass cloth and our own brand of epoxies.

Making and shaping a new Irwin 54 rudder on New Years Day 2011

We started gluing two days back,the epoxy cure time controls progress.

The days are ticking,the ARC Round the World Rally departs from HBYC club waters on January 8th,thats just seven days from tomorrow!

Ensuring a perfect fit has been important.

The depth of the two halves meant they had to be fully milled to shape by Nigel of Digicut,I then freed the small groove off with a selection of hand tools,some quite new,some very old but perfect for the job.

This was the laminated blank before I started the hand plane works.

After belt sanding,we are at the stage when we can apply biaxial glass cloth and epoxy.

Officially old

Things to dwell on from the http://www.hebburn.org/ webb pages! best regards for 2011,Roy

Officially Old


Posted by Steven Kippax on 30/12/2010, 8:19 am

Came across this and thought you guys would find it as interesting as me.

Bring back any memories?

Someone asked the other day, 'What was your favourite 'fast food' when you were growing up?'

'We didn't have fast food when I was growing up,' I informed him.

'All the food was slow.'

'C'mon, seriously.. Where did you eat?'

'It was a place called 'home,'' I explained. !

'Mum cooked every day and when Dad got home from work, we sat down together at the dining room table, and if I didn't like what she put on my plate, I was allowed to sit there until I did like it.'

By this time, the lad was laughing so hard I was afraid he was going to suffer serious internal damage, so I didn't tell him the part about how I had to have permission to leave the table.

But here are some other things I would have told him about my childhood if I'd figured his system could have handled it:

Some parents NEVER owned their own house, wore jeans, set foot on a golf course, travelled out of the country or had a credit card.

My parents never drove me to school. I had a bicycle that weighed probably 50 pounds, and only had one speed, (slow).

We didn't have a television in our house until I was 10.

It was, of course, black and white, and the station went off the air at 10 pm, after playing the national anthem and epilogue; it came back on the air at about 6 a.m. and there was usually a locally produced news and farm show on, featuring local people...

I never had a telephone in my room. The only phone was on a party line. Before you could dial, you had to listen and make sure some people you didn't know weren't already using the line.

Pizzas were not delivered to our home... But milk was.

All newspapers were delivered by boys and all boys delivered newspapers --My brother delivered a newspaper, seven days a week. He had to get up at 6AM every morning.

Film stars kissed with their mouths shut. At least, they did in the films. There were no movie ratings because all movies were responsibly produced for everyone to enjoy viewing, without profanity or violence or almost anything offensive.

If you grew up in a generation before there was fast food, you may want to share some of these memories with your children or grandchildren. Just don't blame me if they bust a gut laughing.

Growing up isn't what it used to be, is it?

MEMORIES from a friend:

My Dad is cleaning out my grandmother's house (she died in December) and hebrought me an old Woodroofe’s Lemonadebottle. In the bottle top was a stopper with a bunch of holes in it... I knew immediately what it was, but my daughter had no idea. She thought they had tried to make it a salt shaker or something. I knew it as the bottle that sat on the end of the ironing board to 'sprinkle' clothes with because we didn't have steam irons. Man, I am old.

How many do you remember?

Headlight dip-switches on the floor of the car.

Ignition switches on the dashboard.

Trouser leg clips for bicycles without chain guards.

Soldering irons you heated on a gas burner.

Using hand signals for cars without turn indicators.

>

Older Than Dirt Quiz:

Count all the ones that you remember, not the ones you were told about.

Ratings at the bottom.

1. Sweet cigarettes

2. Coffee shops with juke boxes

3. Home milk delivery in glass bottles

4. Party lineson the telephone

5. Newsreels before the movie

6. TV test patterns that came on at night after the last show and were there until TV shows started again in the morning.. (There were only 2 channels [if you were fortunate])

7. Peashooters

8. 33 rpm records

9. 45 RPM records

10. Hi-fi's

11. Metal ice trays with levers

12. Blue flashbulb

13. Cork popguns

14. Wash tub wringers

If you remembered 0-3 = You’re still young

If you remembered 3-6 = You are getting older

If you remembered 7-10 = Don't tell your age

If you remembered 11-14 = You're positively ancient!
I must be 'positively ancient' but those memories are some of the best parts of my life.
Don't forget to pass this along!!

Especially to all your really OLD friends....I just did!!!!!!!!!